Tubes and Hollow Conductors for Magnet Windings
 In applications where high magnetic fields are required, magnetic windings are typically made from internally cooled hollow copper sections. The most typical applications for hollow conductors are particle accelerators; hollow conductors are used to make windings for bending magnets and focusing magnets.
Raw materials
The ideal material for hollow conductors is Luvata's high conductivity oxygen free copper. If elevated softening temperature or higher creep strength are required, silver-bearing copper grades based on Luvata Oxygen Free copper can be used. This copper offers very high electrical and thermal conductivity and good brazeability or weldability.
Supply Forms
| Jointless long lengths |
Up to 1300 kg depending on dimension, on a recyclable wooden reel |
| Straight lengths |
Max. approx. 250 kg |
| Loose coils or pancake coils |
Max. 50 to 150 kg depending on size |
| Spools for small sizes only |
Plywood spools with 500 mm and 800 mm
drum diameter |
Hollow conductor tool list
Check Luvata hollow conductor tool list for existing dimensions and shapes.
|