| Air flow scheme |
 |
| Performance ranges |
- Unit coolers capacity: from 1,92 to 16,1 kW *
- Brine coolers and CO2 coolers: customized on demand
- Airflow: from 1.100 to 9.300 m3/h
|
|
- High heat exchange efficiency
- Designed with special profile aluminium fins and inner grooved copper tubes
|
| Coil features |
Fin spacing: according to the room temperature, the employed fin spacing is the following:
-high temperatures (>= +2 °C): 3,5 mm
-medium and low temperatures (>= -25 °C): 7,0 mm recommended, with electric defrost |
| Standard defrost |
Electric (ED) 400V/3/50Hz |
| Casing features |
Made of a magnesium aluminium alloy, with a smooth finish covered by a plastic protection film |
| Fan motor features |
- Diameter: 315 mm
- Dual speed
- Single-phase, with external rotor and inner capacitor
- Voltage: 230V/50-60 Hz
- Protection grade: IP 44
- Class of insulation: F
- Inner thermal contact protection
- Working temperature: from -35 °C to +40 °C
|
| Fan guard features |
Manufactured in fibreglass charged polyamide, according to EN 294 standards |
| Air throw |
The aeraulic combination grants a considerably high air throw, measured in ECO's Technical Lab according to CECOMAF GT6-001 standards |
| Testing |
Heat exchangers are supplied clean and tested at a pressure of 30 bars |
| Miscellaneous |
All the fan motors and electric heaters are connected in separate terminal boxes, with IP 54 protection grade |
* Nominal capacity: assessed in practical operating ambient, i.e. wet conditions; refrigerant R404A; air inlet temperature = 0 °C; evap. temperature = -8 °C; ΔT = 8 K.